Engineering Expert Q&A
Find detailed step-by-step explanations for your Engineering questions.
Ask away - we've got answers
JJ
Jacob Jones
2 days ago
In applying runout tolerances, both the tolerance and the datum feature apply only on an RFS basis.
EO
Emilian Obioha
2 days ago
Bilateral tolerances are characterized as equal and unequal, while unilateral tolerances are characterized as ____.
A) normal and tangential
B) inside and outside
C) obtuse and oblique
D) nominal and standard
A) normal and tangential
B) inside and outside
C) obtuse and oblique
D) nominal and standard
Has Verified Answer
KP
kuljinder Pawar
2 days ago
For greater accuracy, datum targets should be placed as far apart as possible.
Has Verified Answer
RB
Reshma Bhuyan
2 days ago
When testing circular runout, the tolerance is applied independently at any cross section as the part is rotated ____.
A) at high speed
B) 360°
C) at low speed
D) 180°
A) at high speed
B) 360°
C) at low speed
D) 180°
KJ
Kayli Jenkins
2 days ago
Ratchet wheels are designed to transmit motion in either direction.
Has Verified Answer
CB
Chelsea Bothma
2 days ago
Mechanical advantage occurs when a weight in one place lifts a heavier weight in another place.
CA
carlos andres soto rovira
2 days ago
Geometric tolerances are required for every feature of a part.
Has Verified Answer
RD
Reniel Dave Cardenas Guzman
2 days ago
The diameter at the bottom of the tooth is the inside diameter.
SK
Shaurya Khandelwal
2 days ago
Plug welds and slot welds are specified using the same weld symbol.
Has Verified Answer
BA
basit alamgir
2 days ago
For a double-groove joint, joint preparation is required on one side of the joint only.
CH
Camberlyn Harris
2 days ago
The distance from a point on one gear tooth to a corresponding point on the adjacent tooth measured on the circumference of the pitch diameter is the ____.
A) circular pitch
B) circular thickness
C) chordal thickness
D) diametral pitch
A) circular pitch
B) circular thickness
C) chordal thickness
D) diametral pitch
Has Verified Answer
EB
ELINA BUTRUS
3 days ago
The acronym AWS stands for ____.
A) American Welding Society
B) Association for Welding Specifications
C) American Welding Specifications
D) American Welding Standards
A) American Welding Society
B) Association for Welding Specifications
C) American Welding Specifications
D) American Welding Standards
Has Verified Answer
KM
Kabelo Monnakgotla
3 days ago
In dimensioning for a two-axis coordinate system, distances above the X axis are considered to be negative Y values.
Has Verified Answer
JT
Jaywant Thorat
3 days ago
Field welds are welds made at a location other than in the shop or at the initial place of construction.
Has Verified Answer
KG
KRISLYN GRIFFITH
3 days ago
In sand casting, a core is often used to produce a cavity in the final casting.
MM
Muppuri Madhusai
3 days ago
Taper pins, cotter pins, and spring pins are examples of quick release fasteners.