Engineering Expert Q&A
Find detailed step-by-step explanations for your Engineering questions.
Ask away - we've got answers
.SM
Shauna Moore
3 days ago
A microinch (one millionth of an inch) can be specified as ____.
A) .00001 inch
B) .000001 inch
C) .0000001 inch
D) .00000001 inch
A) .00001 inch
B) .000001 inch
C) .0000001 inch
D) .00000001 inch
Has Verified Answer
JJ
Jessica Jordan
3 days ago
Members such as ribs and arms that blend into other features end in curves called runouts.
RG
Russell Gradel
4 days ago
A taper ratio of 2:1 means the diameter at one end is half that at the other end.
TM
Tsholofelo Maake
4 days ago
It is acceptable to omit undercut dimensions if the dimensions are unimportant.
Has Verified Answer
AB
Angela Buchanan
4 days ago
An undercut is specified using the diameter of the material before it is cut.
MF
maddie firkins
4 days ago
A flat taper is used in the manufacture of ____.
A) shims
B) dowels
C) cylinders
D) drill bits
A) shims
B) dowels
C) cylinders
D) drill bits
Has Verified Answer
KP
Kaleo Pebria
4 days ago
A conical taper is used in the manufacture of ____.
A) shims
B) dowels
C) cylinders
D) drill bits
A) shims
B) dowels
C) cylinders
D) drill bits
Has Verified Answer
BV
Bharti Vaghmare
4 days ago
Creating an undercut is ____.
A) the rounding of a corner
B) the lengthening of a shaft
C) the cutting of a "groove"
D) the addition of material to a part
A) the rounding of a corner
B) the lengthening of a shaft
C) the cutting of a "groove"
D) the addition of material to a part
TB
Tristan Bulandus
4 days ago
Long-break lines are thick lines with freehand zigzags.
Has Verified Answer
.CG
Colin Glenn
4 days ago
The size of a revision block is the same on every drawing.
Has Verified Answer
EM
Elena Martinez
4 days ago
The abbreviation for millimeter is ____.
A) mm.
B) µm
C) mm
D) MM
A) mm.
B) µm
C) mm
D) MM
Has Verified Answer
RR
Rajasekhar Reddy
4 days ago
In a cavalier oblique drawing, the receding axes are reduced to one-half their normal length.
Has Verified Answer
DM
Deborlee Mitschele
4 days ago
In oblique pictorial drawing, the receding axis is generally drawn at an angle of 30°, 45°, or 60° to the horizontal.