The ____________ ______________ switch or sensor is used to provide information to the computer about which gear or range the transmission is placed in by the driver.

By observing the direction of current flow through the circuit, v oltage _____ can be determined .

A) drop
B) polarity

If an object is placed in the field of an strong electromagnet connected to an AC line, the object will be _____.

A) demagnetized
B) magnetized

If a piece of machinery needs a replacement motor and will be damaged if the new motor rotates the wrong way. The test equipment needed to test the rotation direction of the new motor is a _____.

A) phase angle voltmeter
B) MEGGER^®
C) digital multimeter
D) phase rotation meter

In a series RC circuit, apparent power can be calculated by _____.

A) E_T × I
B) E_R × I
C) E_C × I

A cathode is an electrode or electrical conductor into which current flows.

Two capacitors, a 20 μ F and a 30 μ F, are connected in parallel. What is the total capacitance?

A) 12 μ F
B) 50 μ F

All of the following statements about bench bleeding master cylinders are true EXCEPT:

A) Bench bleeding removes the air.
B) Bench bleeding is most effective when the fluid is allowed to squirt out into the bench.
C) Bench bleeding prefills the master cylinder.
D) Bench bleeding reduces the amount of bleeding that needs to be done on the vehicle.

The direct current that is an input to the alternator's rotor is the _____ current.

A) excitation
B) starting
C) synchronizing
D) initiating